Figure of the Earth
Geodesy  

Fundamentals 

Concepts 

Standards (history)


Figure of the Earth is a term of art in geodesy that refers to the size and shape used to model Earth. The size and shape it refers to depend on context, including the precision needed for the model. The sphere is an approximation of the figure of the Earth that is satisfactory for many purposes. Several models with greater accuracy have been developed so that coordinate systems can serve the precise needs of navigation, surveying, cadastre, land use, and various other concerns.
Contents
Motivation
Earth's topographic surface is apparent with its variety of land forms and water areas. This topographic surface is generally the concern of topographers, hydrographers, and geophysicists. While it is the surface on which Earth measurements are made, mathematically modeling it while taking the irregularities into account would be extremely complicated.
The Pythagorean concept of a spherical Earth offers a simple surface that is easy to deal with mathematically. Many astronomical and navigational computations use a sphere to model the Earth as a close approximation. However, a more accurate figure is needed for measuring distances and areas on the scale beyond the purely local. Better approximations can be had by modeling the entire surface as an oblate spheroid, using spherical harmonics to approximate the geoid, or modeling a region with a bestfit reference ellipsoids.
For surveys of small areas, a planar (flat) model of Earth's surface suffices because the local topography overwhelms the curvature. Planetable surveys are made for relatively small areas without considering the size and shape of the entire Earth. A survey of a city, for example, might be conducted this way.
By the late 1600s, serious effort was devoted to modeling the Earth as an ellipsoid, beginning with Jean Picard's measurement of a degree of arc along the Paris meridian. Improved maps and better measurement of distances and areas of national territories motivated these early attempts. Surveying instrumentation and techniques improved over the ensuing centuries. Models for the figure of the earth improved in step.
In the mid to late 20th century, research across the geosciences contributed to drastic improvements in the accuracy of the figure of the Earth. The primary utility of this improved accuracy was to provide geographical and gravitational data for the inertial guidance systems of ballistic missiles. This funding also drove the expansion of geoscientific disciplines, fostering the creation and growth of various geoscience departments at many universities.^{[1]} These developments benefited many civilian pursuits as well, such as weather and communication satellite control and GPS locationfinding, which would be impossible without highly accurate models for the figure of the Earth.
Models
The models for the figure of the Earth vary in the way they are used, in their complexity, and in the accuracy with which they represent the size and shape of the Earth.
Sphere
The simplest model for the shape of the entire Earth is a sphere. The Earth's radius is the distance from Earth's center to its surface, about 6,371 kilometers (3,959 mi). While "radius" normally is a characteristic of perfect spheres, the Earth deviates from spherical by only a third of a percent, sufficiently close to treat it as a sphere in many contexts and justifying the term "the radius of the Earth".
The concept of a spherical Earth dates back to around the 6th century BC,^{[2]} but remained a matter of philosophical speculation until the 3rd century BC. The first scientific estimation of the radius of the Earth was given by Eratosthenes about 240 BC, with estimates of the accuracy of Eratosthenes’s measurement ranging from 2% to 15%.
The Earth is only approximately spherical, so no single value serves as its natural radius. Distances from points on the surface to the center range from 6,353 km to 6,384 km (3,947 – 3,968 mi). Several different ways of modeling the Earth as a sphere each yield a mean radius of 6,371 kilometers (3,959 mi). Regardless of the model, any radius falls between the polar minimum of about 6,357 km and the equatorial maximum of about 6,378 km (3,950 – 3,963 mi). The difference 21 kilometers (13 mi) correspond to the polar radius being approximately 0.3% shorter than the equator radius.
Ellipsoid of revolution
Since the Earth is flattened at the poles and bulges at the Equator, geodesy represents the figure of the Earth as an oblate spheroid. The oblate spheroid, or oblate ellipsoid, is an ellipsoid of revolution obtained by rotating an ellipse about its shorter axis. It is the regular geometric shape that most nearly approximates the shape of the Earth. A spheroid describing the figure of the Earth or other celestial body is called a reference ellipsoid. The reference ellipsoid for Earth is called an Earth ellipsoid.
An ellipsoid of revolution is uniquely defined by two quantities. Several conventions for expressing the two quantities are used in geodesy, but they are all equivalent to and convertible with each other:
 Equatorial radius (called semimajor axis), and polar radius (called semiminor axis);
 and eccentricity ;
 and flattening .
Eccentricity and flattening are different ways of expressing how squashed the ellipsoid is. When flattening appears as one of the defining quantities in geodesy, generally it is expressed by its reciprocal. For example, in the WGS 84 spheroid used by today's GPS systems, the reciprocal of the flattening is set to be exactly 298.257223563.
The difference between a sphere and a reference ellipsoid for Earth is small, only about one part in 300. Historically, flattening was computed from grade measurements. Nowadays, geodetic networks and satellite geodesy are used. In practice, many reference ellipsoids have been developed over the centuries from different surveys. The flattening value varies slightly from one reference ellipsoid to another, reflecting local conditions and whether the reference ellipsoid is intended to model the entire Earth or only some portion of it.
A sphere has a single radius of curvature, which is simply the radius of the sphere. More complex surfaces have radii of curvature that vary over the surface. The radius of curvature describes the radius of the sphere that best approximates the surface at that point. Oblate ellipsoids have constant radius of curvature east to west along parallels, if a graticule is drawn on the surface, but varying curvature in any other direction. For an oblate ellipsoid, the polar radius of curvature is larger than the equatorial
because the pole is flattened: the flatter the surface, the larger the sphere must be to approximate it. Conversely, the ellipsoid's northsouth radius of curvature at the equator is smaller than the polar
where is the distance from the center of the ellipsoid to the equator (semimajor axis), and is the distance from the center to the pole. (semiminor axis)
Geoid
It was stated earlier that measurements are made on the apparent or topographic surface of the Earth and it has just been explained that computations are performed on an ellipsoid. One other surface is involved in geodetic measurement: the geoid. In geodetic surveying, the computation of the geodetic coordinates of points is commonly performed on a reference ellipsoid closely approximating the size and shape of the Earth in the area of the survey. The actual measurements made on the surface of the Earth with certain instruments are however referred to the geoid. The ellipsoid is a mathematically defined regular surface with specific dimensions. The geoid, on the other hand, coincides with that surface to which the oceans would conform over the entire Earth if free to adjust to the combined effect of the Earth's mass attraction (gravitation) and the centrifugal force of the Earth's rotation. As a result of the uneven distribution of the Earth's mass, the geoidal surface is irregular and, since the ellipsoid is a regular surface, the separations between the two, referred to as geoid undulations, geoid heights, or geoid separations, will be irregular as well.
The geoid is a surface along which the gravity potential is everywhere equal and to which the direction of gravity is always perpendicular (see equipotential surface). The latter is particularly important because optical instruments containing gravityreference leveling devices are commonly used to make geodetic measurements. When properly adjusted, the vertical axis of the instrument coincides with the direction of gravity and is, therefore, perpendicular to the geoid. The angle between the plumb line which is perpendicular to the geoid (sometimes called "the vertical") and the perpendicular to the ellipsoid (sometimes called "the ellipsoidal normal") is defined as the deflection of the vertical. It has two components: an eastwest and a northsouth component.^{[3]}
Other shapes
The possibility that the Earth's equator is better characterized as an ellipse rather than a circle and therefore that the ellipsoid is triaxial has been a matter of scientific inquiry for many years.^{[4]}^{[5]} Modern technological developments have furnished new and rapid methods for data collection and, since the launch of Sputnik 1, orbital data have been used to investigate the theory of ellipticity.^{[3]} More recent results indicate a 70m difference between the two equatorial major and minor axes of inertia, with the larger semidiameter pointing to 15° W longitude (and also 180degree away).^{[6]}^{[7]}
A second theory, more complicated than triaxiality, proposed that observed long periodic orbital variations of the first Earth satellites indicate an additional depression at the south pole accompanied by a bulge of the same degree at the north pole. It is also contended that the northern middle latitudes were slightly flattened and the southern middle latitudes bulged in a similar amount. This concept suggested a slightly pearshaped Earth and was the subject of much public discussion after the launch of the first artificial satellites.^{[3]}
John A. O'Keefe and coauthors are credited with the discovery that the Earth had a significant third degree zonal spherical harmonic in its gravitational field using U.S. Vanguard 1 satellite data collected in the late 1950s.^{[8]} Based on further satellite geodesy data, Desmond KingHele refined the estimate to a 45m difference between north and south polar radii, owing to a 19m "stem" rising in the north pole and a 26m depression in the south pole.^{[9]}^{[10]} The polar asymmetry is small, though: it is about a thousand times smaller than the earth's flattening and even smaller than the geoidal undulation is some regions of the Earth.^{[11]}
Modern geodesy tends to retain the ellipsoid of revolution as a reference ellipsoid and treat triaxiality and pear shape as a part of the geoid figure: they are represented by the spherical harmonic coefficients and , respectively, corresponding to degree and order numbers 2.2 for the triaxiality and 3.0 for the pear shape.
Local approximations
Simpler local approximations are possible, e.g., osculating sphere and local tangent plane.
Earth rotation and Earth's interior
Determining the exact figure of the Earth is not only a geometric task of geodesy, but also has geophysical considerations. According to theoretical arguments by Isaac Newton, Leonhard Euler, and others, a body having a uniform density of 5.515 g/cm^{3} that rotates like the Earth should have a flattening of 1:229. This can be concluded without any information about the composition of Earth's interior.^{[12]} However, the measured flattening is 1:298.25, which is closer to a sphere and a strong argument that Earth's core is extremely compact. Therefore, the density must be a function of the depth, ranging from 2.6 g/cm^{3} at the surface (rock density of granite, etc.), up to 13 g/cm^{3} within the inner core.^{[13]}
Global and regional gravity field
Also with implications for the physical exploration of the Earth's interior is the gravitational field, which can be measured very accurately at the surface and remotely by satellites. True vertical generally does not correspond to theoretical vertical (deflection ranges up to 50") because topography and all geological masses disturb the gravitational field. Therefore, the gross structure of the earth's crust and mantle can be determined by geodeticgeophysical models of the subsurface.
Volume
The volume of the reference ellipsoid is V = 4/3πa^{2}b, where a and b are its semimajor and semiminor axes. Using the parameters from WGS84 ellipsoid of revolution, a = 6,378.137 km and b = 6,356.7523142km, V = 1.08321×10^{12} km^{3} (2.5988×10^{11} cu mi).^{[14]}
See also
 Clairaut's theorem
 EGM96
 Horizon §§ Distance and Curvature
 Meridian arc
 Theoretical gravity
 Gravity formula
 Gravity of Earth
 History
References
 ^ Cloud, John (2000). "Crossing the Olentangy River: The Figure of the Earth and the MilitaryIndustrialAcademic Complex, 1947–1972". Studies in History and Philosophy of Modern Physics. 31 (3): 371–404. Bibcode:2000SHPMP..31..371C. doi:10.1016/S13552198(00)000174.
 ^ Dicks, D.R. (1970). Early Greek Astronomy to Aristotle. Ithaca, N.Y.: Cornell University Press. pp. 72–198. ISBN 9780801405617.
 ^ ^{a} ^{b} ^{c} Defense Mapping Agency (1983). Geodesy for the Layman (PDF) (Report). United States Air Force.
 ^ Heiskanen, W. A. (1962). "Is the Earth a triaxial ellipsoid?". Journal of Geophysical Research. 67 (1): 321–327. Bibcode:1962JGR....67..321H. doi:10.1029/JZ067i001p00321.
 ^ Burša, Milan (1993). "Parameters of the Earth's triaxial level ellipsoid". Studia Geophysica et Geodaetica. 37 (1): 1–13. Bibcode:1993StGG...37....1B. doi:10.1007/BF01613918.
 ^ Torge & Müller (2012) Geodesy, De Gruyter, p.100
 ^ Marchenko, A.N. (2009): Current estimation of the Earth’s mechanical and geometrical para meters. In Sideris, M.G., ed. (2009): Observing our changing Earth. IAG Symp. Proceed. 133., p. 473–481. DOI:10.1007/9783540854265_57
 ^ O’KEEFE, J. A., ECKEIS, A., & SQUIRES, R. K. (1959). Vanguard Measurements Give PearShaped Component of Earth’s Figure. Science, 129(3348), 565–566. doi:10.1126/science.129.3348.565
 ^ KINGHELE, D. G.; COOK, G. E. (1973). "Refining the Earth's Pear Shape". Nature. Springer Nature. 246 (5428): 86–88. doi:10.1038/246086a0. ISSN 00280836.
 ^ KingHele, D. (1967). The Shape of the Earth. Scientific American, 217(4), 6780. [1]
 ^ Günter Seeber (2008), Satellite Geodesy, Walter de Gruyter, 608 pages. [2]
 ^ Heine, George (2013). "Euler and the Flattening of the Earth". Math Horizons. 21 (1). Mathematical Association of America. doi:10.4169/mathhorizons.21.1.25.
 ^ Dziewonski, A. M.; Anderson, D. L. (1981), "Preliminary reference Earth model" (PDF), Physics of the Earth and Planetary Interiors, 25 (4): 297–356, Bibcode:1981PEPI...25..297D, doi:10.1016/00319201(81)900467, ISSN 00319201
 ^ Williams, David R. (1 September 2004), Earth Fact Sheet, NASA, retrieved 17 March 2007
 Attribution
This article incorporates text from a publication now in the public domain: Defense Mapping Agency (1983). Geodesy for the Layman (PDF) (Report). United States Air Force.
Further reading
 Guy Bomford, Geodesy, Oxford 1962 and 1880.
 Guy Bomford, Determination of the European geoid by means of vertical deflections. Rpt of Comm. 14, IUGG 10th Gen. Ass., Rome 1954.
 Karl Ledersteger and Gottfried Gerstbach, Die horizontale Isostasie / Das isostatische Geoid 31. Ordnung. Geowissenschaftliche Mitteilungen Band 5, TU Wien 1975.
 Helmut Moritz and Bernhard Hofmann, Physical Geodesy. Springer, Wien & New York 2005.
 Geodesy for the Layman, Defense Mapping Agency, St. Louis, 1983.
External links
 Reference Ellipsoids (PCI Geomatics)
 Reference Ellipsoids (ScanEx)
 Changes in Earth shape due to climate changes
 Jos Leys "The shape of Planet Earth"